Step 1. Add a plant profile

Add a plant profile to the garden, either via the plant search, the garden or the plant library screen.

Step 2. Pair the FYTA Beam

1. Open the plant profile, add the FYTA Beam, and follow the instructions to pair it with your mobile phone
2. Open the battery cover and remove the battery slip.
3. The pairing will start automatically.

Close the battery cover once the pairing is concluded.

If the pairing was unsuccessful, press the button on the back of the FYTA Beam to re-start the pairing process.

Step 3. Insert the FYTA Beam

Insert the Beam close to the stem of your plant, be careful not to hurt the roots. Turn the dome towards the light source and make sure it is not covered by any leaves.

Wait a few hours for the first data readings and plant care instructions. If you're super-curious about how your plant is doing, go ahead and do a quick check with the live mode in the plant profile.

For WiFi Hub only

Add the hub through the garden screen. Follow the instructions in the App. You can add the hub at any time, before or after you have added any FYTA Beams.